It is a specialized system of industry in which high-velocity negative air pressure is used to move heavy textile laundry and automotive manufacturing waste through special stainless-steel chutes. The materials are conveyed to the central processing/collection rooms at high speeds which leaves production areas clean and uncluttered.
Yes, the inside of the transfer pipelines are made of ultra-smooth, heavy-gauge stainless steel with totally smooth welds. This is a careful production method which makes sure that fabrics, heavy overalls and oily waste products slide through the network with ease without snagging, tearing or forming internal blockages.
The system is constructed in such a way that there are automated fire isolation dampers that open and close individual sections of the chute when a temperature spike is detected. The special dry-pipe sprinkler nozzles and built-in smoke sensors are installed in strategic positions to put out any focused fire threat instantly before it can propagate.
Yes, our car transfer system has non-corrosive interior finishes, and liquid drainage traps to safely dispose of oil-soaked rags or wet linens. The exhausted air is also taken through heavy activated-carbon beds by the air filtration system to absorb industrial chemical smells and fumes to the latter.
Whereas conventional PSA systems apply high pressure to the adsorption of gas, a VPSA Oxygen Generator has much lower pressure requirements and a vacuum blower regeneration. This special technical design saves electrical power by a remarkable margin as it is the most economical in terms of relative cost to large scale, high capacity oxygen requirements in industries.
This large system is appropriate in industrial activities that are heavy such as wastewater treatment, glass, steel, and pulp bleaching. VPSA technology will also be far more sustainable than the old-fashioned methods of any facility that needs a stable and high volume of oxygen more than 20 tons per day.
When operating under usual conditions and with the appropriate filtration of the intake air, the high quality molecular sieve in our VPSA system can last more than a decade. The low-pressure operating cycle minimizes mechanical stress on the sieve material, leading to premature dusting, and long-term structural stability.
Yes, the built-in PLC has in-built smart capacity modulation which automatically varies the blower and vacuum speed in accordance with real-time downstream storage tank pressure. This enables the equipment to react effectively to the changing plant requirements without unnecessary consumption of power or release of unnecessary oxygen to the atmosphere.
An Oxygen Gas Booster is designed to pressurize the low pressure oxygen gas in a generator or storage tank safely to much higher pressure. It enables you to fill high-pressure cylinders on site, feed high-pressure cutting machines or store gas efficiently to supply the emergency backup systems.
To remove the extreme risk of combustion that high-pressure oxygen poses, this booster has an entirely oil-free design with self-lubricating PTFE seals and distance pieces that are isolated. This rigid structural segregation makes sure that the pure oxygen gas stream will never be in contact with any hydrocarbons or lubricants.
The machine has automated safety cut-offs on high discharge pressure, excessive gas temperature and low inlet pressure to avoid dry running or overheating. It also has powerful stainless-steel pressure safety valves at every compression stage to take care of the unexpected over-pressurization immediately.
Yes, our booster is constructed with flexible control valves that will permit it to take different pressures of inlet, varying between types of oxygen generators. The system controls its internal compression cycles automatically to a steady, high-pressure output without leading to upstream pressure drops and system stall.
A complete turnkey Oxygen Generator consists of an industrial air compressor, a refrigerated air dryer, multiple stage pre-filters, an air receiver tank, the generator tower itself and an oxygen surge tank. All this is geared towards purifying raw ambient air into high purity oxygen gas with safety.
The choice of the correct model will be based upon your peak hourly flow rate needs, the type of purity level your purpose needs and the minimum delivery pressure. These metrics are computed by our engineering team using your consumption data in order to provide you with the right sized, energy efficient machine.
Yes, our contemporary units are fitted with hi-tech IoT enabled control units which enable operators to remotely monitor purity, pressure and flow rates through normal web browsers. The system is also capable of sending real time SMS or email notifications in case any maintenance limit or operation anomaly is detected.
Our production plant follows high international quality standards, and all oxygen generators are fully certified in terms of the applicable ISO, CE, and pressure vessel regulations. Every unit is subjected to stringent factory acceptance tests prior to delivery to ensure commissioning is trouble free and complete safety at your workplace.
An Oxyroom system is a hi-tech indoor climate system that adds more nutritional oxygen into the air within a closed room. By increasing the oxygen levels to the ideal wellness levels, it will help fight fatigue, enhance brain alertness, and alleviate symptoms of altitude sickness.
Yes, the system is set with accurate automated sensors that keeps the oxygen content at a narrow, scientifically proven safety margin of 21-23. This small fortification offers perceivable health and vitality gains without ever attaining levels that may raise fire risks or lead to respiratory inconvenience.
The main generation equipment is either enclosed in a soundproofed structure or housed in an external utility room to enable a noise level indoors to remain at a whisper. There is nothing but a smooth, quiet diffuser panel visible in the room to allow users to rest, work or sleep without being distracted by acoustic disturbances.
Yes, our Oxyroom system can be easily set up to inject oxygen into your central HVAC ducting system or be installed as a ductless system. The smart control unit is compatible with contemporary building management systems and can be easily connected with them to synchronise climate and air-quality.
The Purvect Air Purification System uses a multi-stage molecular filtration and the highest level of photocatalytic oxidation in order to eliminate volatile organic compounds (VOCs), gases and microscopic pathogens. This industrial grade filter is a major advancement over simple passive filters as it absorbs harmful chemical contaminants, rather than simply trapping dust at a molecular scale.
Yes, this is a powerful purification system, which is specifically designed to work in high-airflow facilities, and thus can be used in cleanrooms, chemical labs, manufacturing facilities, and hospitals. It has high-static pressure fans capable of drawing large quantities of air through thick filtration beds without decreasing the total ventilation effectiveness.
No, the Purvect system is uniquely designed and validated to perform totally ozone-free, with total safety of occupied corporate and industrial areas. The catalytic reactions that take place internally are fully enclosed in the shielded filter housing emitting no content but clean and purified air into the building.
A Pneumatic Tube System is based on the idea of using a carefully controlled air pressure and vacuum blowers to drive specially capped carriers through a net of dedicated overhead pipes. It transfers paperwork, lab samples or small parts with speeds up to 8 meters per second, moving around massive facilities within seconds.
The system has intelligent frequency-controlled blowers which automatically vary the air pressure in order to give a soft-landing phase, which is gentle and soft, at the receiving terminal. Carriers may also be fitted with special foam inserts to allow the transportation of delicate medical specimens or delicate electronics without risk of being impact damaged.
That network can be expanded to an unlimited size with smart multi-way diverters and branch switches to link dozens of standalone stations in multiple buildings or floors. All active pathways are simultaneously monitored by the central controlling computer, eliminating carrier collisions, and allowing control of traffic flow with complete precision.
Each station has an easy to use digital display panel which displays real time tracking measures of all incoming and outgoing dispatches. This system has a unique barcode or RFID tracking on every carrier, which enables the managers to access full chain-of-custody logs, which can be used in the audit process.
Our Automated Guided Vehicles are controlled by high-tech laser guidance, magnetic tape tracks or a natural feature navigation technology that does not involve structural floor modifications. The onboard navigation computer continuously compares environmental scan data with pre-mapped layouts, to determine accurate positioning within millimeters.
The AGVs will be driven by industrial grade lithium-ion battery packs which will be charged during the standard operational break or idle queue periods. This intelligent charging system enables the cars to operate throughout the day in a series of shifts without manual battery changes or long periods of downtime.
You can use our versatile AGV range with roller decks, lifting forks or tailor-made towing hitches to carry payloads between 500 kg and a few tons. The sensors are also inbuilt load sensors built into the vehicle to ensure that the weight is not exceeded prior to movement to avoid stability problems or strain on the motor during transportation.
All vehicles have safety-certified LiDAR scanners that generate customizable protection fields around the machine. When a human object or worker gets into the warning zone, the AGV automatically slows and when the path becomes fully blocked, the AGV comes to a smooth, immediate halt.
The Hyperbaric Oxygen Chamber is effective in that it elevates the internal atmospheric pressure to levels that are far beyond the normal conditions in the sea accompanied by the delivery of 100 percent pure oxygen. This specialized environment enables the lungs to take up much more oxygen which is then dissolved into the blood plasma to speed up natural cellular repair processes.
This high purity chamber has many backup safety features, such as dual emergency pressure release valves, which are quick-bleed, anti-static grounding, and in-built communication intercom. The whole pressure vessel is constructed of medical grade material, with multi-layered acrylic viewing ports in which the operators can observe the conditions without interruption on the outside.
Yes, the system has a very accurate electronic control panel, which enables the operator to program the pressurization and depressurization rates according to the protocols. Mature climate control mechanisms also control the internal humidity and temperature, such that the chamber is not too warm even in the prolonged working sessions.
The entire installation, structural leveling and intense pressure-testing procedures to make sure that there is complete adherence to the medical standards are done by our certified engineering team on site. We also offer complete operational training and issue detailed calibration certificates to ensure the system is operational on the first day in a safe manner.
This is an industrial system that uses Carbon Molecular Sieves (CMS) of high quality to selectively adsorb high pressure compressed air stream oxygen and moisture molecules. This is done to enable pure nitrogen gas to flow through the bed to a specific receiver tank which supplies an uninterrupted supply at the site.
Our generator is smooth and can be adjusted to provide nitrogen purities of up to 95% up to 99.999% depending on your exact use requirements. These purity parameters are easy to adjust using the user-friendly touchscreen interface and therefore, can be used in food packaging or chemical blanketing.
With an on-site generator, the logistical nightmare, rental charges, and safety risks of dealing with high-pressure cylinders are completely avoided. It offers one of the most predictable, less cost-per-cubic-meter of gas, and your facility will reap the full benefits of investment in a limited time frame.
Yes, the generator is accompanied with a built-in air treatment package that incorporates high-efficiency moisture separators, coalescing pre-filters, and desiccant air dryer. Such an extensive arrangement makes sure that the ingoing air stream is absolutely clean and dry, avoiding premature degradation of the adsorbent media.
Our PSA Oxygen Generator is based on high-grade Zeolite Molecular Sieves (ZMS) that are used to separate oxygen and compressed air in the most efficient way possible. This automatic system allows a constantly ready supply of gas, reducing operational costs by removing the need to use old-fashioned liquid oxygen cylinders or bulk supplies.
This rugged system is capable of continuously producing a range of oxygen purities of 93 to 95 percent, which is ideal to satisfy standard industrial and medical needs. Integrated purity monitors constantly check the quality of the output, and an automatic safety bypass or alarm system is activated in case any of the levels ever change outside of your set points.
In order to ensure that the molecular sieves are not contaminated with oil and moisture, regular maintenance is based on the air compressor filtration system. The principal adsorbent beds are constructed to last long, and you are only required to replace the regular air filters and valve seals after some time to maintain maximum efficiency.
Yes, it is a 24/7 continuous industrial operating system which is designed to have minimal manual intervention. It has a sophisticated PLC-based control panel which automatically balances the air pressure and adsorption cycles enabling the equipment to operate effectively in volatile and heavy-duty workspace environments.
An Electrical Track Vehicle system is a set of self-propelled, intelligent vehicles which ride on a set of overhead or wall mounted aluminum tracks. This system operates on special light-to-medium-weight electrified rails to carry out all types of light and medium-weight payloads through facility layouts, which otherwise occupy valuable floor space.
Since the individual vehicles do not actually consume active power until they are actively in motion, the system is radically more efficient in terms of energy consumption as compared to the conventional continuous conveyor belts. The vehicles idle in the absence of any active transport commands without consuming any power of the facility.
Each vehicle has its own onboard microprocessors which continually perform self-diagnostics and report their precise position to the master control software. In case of a technical failure in a vehicle, the system will automatically switch over to alternative track loops, so that your plant logistics will never come to a standstill.
Our PSA Oxygen Generator is based on high-grade Zeolite Molecular Sieves (ZMS) that are used to separate oxygen and compressed air in the most efficient way possible. This automatic system allows a constantly ready supply of gas, reducing operational costs by removing the need to use old-fashioned liquid oxygen cylinders or bulk supplies.
This rugged system is capable of continuously producing a range of oxygen purities of 93 to 95 percent, which is ideal to satisfy standard industrial and medical needs. Integrated purity monitors constantly check the quality of the output, and an automatic safety bypass or alarm system is activated in case any of the levels ever change outside of your set points.
In order to ensure that the molecular sieves are not contaminated with oil and moisture, regular maintenance is based on the air compressor filtration system. The principal adsorbent beds are constructed to last long, and you are only required to replace the regular air filters and valve seals after some time to maintain maximum efficiency.
Yes, it is a 24/7 continuous industrial operating system which is designed to have minimal manual intervention. It has a sophisticated PLC-based control panel which automatically balances the air pressure and adsorption cycles enabling the equipment to operate effectively in volatile and heavy-duty workspace environments.
The Hyperbaric Oxygen Chamber is effective in that it elevates the internal atmospheric pressure to levels that are far beyond the normal conditions in the sea accompanied by the delivery of 100 percent pure oxygen. This specialized environment enables the lungs to take up much more oxygen which is then dissolved into the blood plasma to speed up natural cellular repair processes.
This high purity chamber has many backup safety features, such as dual emergency pressure release valves, which are quick-bleed, anti-static grounding, and in-built communication intercom. The whole pressure vessel is constructed of medical grade material, with multi-layered acrylic viewing ports in which the operators can observe the conditions without interruption on the outside.
Yes, the system has a very accurate electronic control panel, which enables the operator to program the pressurization and depressurization rates according to the protocols. Mature climate control mechanisms also control the internal humidity and temperature, such that the chamber is not too warm even in the prolonged working sessions.
The entire installation, structural leveling and intense pressure-testing procedures to make sure that there is complete adherence to the medical standards are done by our certified engineering team on site. We also offer complete operational training and issue detailed calibration certificates to ensure the system is operational on the first day in a safe manner.
This is an industrial system that uses Carbon Molecular Sieves (CMS) of high quality to selectively adsorb high pressure compressed air stream oxygen and moisture molecules. This is done to enable pure nitrogen gas to flow through the bed to a specific receiver tank which supplies an uninterrupted supply at the site.
Our generator is smooth and can be adjusted to provide nitrogen purities of up to 95% up to 99.999% depending on your exact use requirements. These purity parameters are easy to adjust using the user-friendly touchscreen interface and therefore, can be used in food packaging or chemical blanketing.
With an on-site generator, the logistical nightmare, rental charges, and safety risks of dealing with high-pressure cylinders are completely avoided. It offers one of the most predictable, less cost-per-cubic-meter of gas, and your facility will reap the full benefits of investment in a limited time frame.
Yes, the generator is accompanied with a built-in air treatment package that incorporates high-efficiency moisture separators, coalescing pre-filters, and desiccant air dryer. Such an extensive arrangement makes sure that the ingoing air stream is absolutely clean and dry, avoiding premature degradation of the adsorbent media.
Whereas conventional PSA systems apply high pressure to the adsorption of gas, a VPSA Oxygen Generator has much lower pressure requirements and a vacuum blower regeneration. This special technical design saves electrical power by a remarkable margin as it is the most economical in terms of relative cost to large scale, high capacity oxygen requirements in industries.
This large system is appropriate in industrial activities that are heavy such as wastewater treatment, glass, steel, and pulp bleaching. VPSA technology will also be far more sustainable than the old-fashioned methods of any facility that needs a stable and high volume of oxygen more than 20 tons per day.
When operating under usual conditions and with the appropriate filtration of the intake air, the high quality molecular sieve in our VPSA system can last more than a decade. The low-pressure operating cycle minimizes mechanical stress on the sieve material, leading to premature dusting, and long-term structural stability.
Yes, the built-in PLC has in-built smart capacity modulation which automatically varies the blower and vacuum speed in accordance with real-time downstream storage tank pressure. This enables the equipment to react effectively to the changing plant requirements without unnecessary consumption of power or release of unnecessary oxygen to the atmosphere.
An Oxygen Gas Booster is designed to pressurize the low pressure oxygen gas in a generator or storage tank safely to much higher pressure. It enables you to fill high-pressure cylinders on site, feed high-pressure cutting machines or store gas efficiently to supply the emergency backup systems.
To remove the extreme risk of combustion that high-pressure oxygen poses, this booster has an entirely oil-free design with self-lubricating PTFE seals and distance pieces that are isolated. This rigid structural segregation makes sure that the pure oxygen gas stream will never be in contact with any hydrocarbons or lubricants.
The machine has automated safety cut-offs on high discharge pressure, excessive gas temperature and low inlet pressure to avoid dry running or overheating. It also has powerful stainless-steel pressure safety valves at every compression stage to take care of the unexpected over-pressurization immediately.
Yes, our booster is constructed with flexible control valves that will permit it to take different pressures of inlet, varying between types of oxygen generators. The system controls its internal compression cycles automatically to a steady, high-pressure output without leading to upstream pressure drops and system stall.
A complete turnkey Oxygen Generator consists of an industrial air compressor, a refrigerated air dryer, multiple stage pre-filters, an air receiver tank, the generator tower itself and an oxygen surge tank. All this is geared towards purifying raw ambient air into high purity oxygen gas with safety.
The choice of the correct model will be based upon your peak hourly flow rate needs, the type of purity level your purpose needs and the minimum delivery pressure. These metrics are computed by our engineering team using your consumption data in order to provide you with the right sized, energy efficient machine.
Yes, our contemporary units are fitted with hi-tech IoT enabled control units which enable operators to remotely monitor purity, pressure and flow rates through normal web browsers. The system is also capable of sending real time SMS or email notifications in case any maintenance limit or operation anomaly is detected.
Our production plant follows high international quality standards, and all oxygen generators are fully certified in terms of the applicable ISO, CE, and pressure vessel regulations. Every unit is subjected to stringent factory acceptance tests prior to delivery to ensure commissioning is trouble free and complete safety at your workplace.
An Oxyroom system is a hi-tech indoor climate system that adds more nutritional oxygen into the air within a closed room. By increasing the oxygen levels to the ideal wellness levels, it will help fight fatigue, enhance brain alertness, and alleviate symptoms of altitude sickness.
Yes, the system is set with accurate automated sensors that keeps the oxygen content at a narrow, scientifically proven safety margin of 21-23. This small fortification offers perceivable health and vitality gains without ever attaining levels that may raise fire risks or lead to respiratory inconvenience.
The main generation equipment is either enclosed in a soundproofed structure or housed in an external utility room to enable a noise level indoors to remain at a whisper. There is nothing but a smooth, quiet diffuser panel visible in the room to allow users to rest, work or sleep without being distracted by acoustic disturbances.
Yes, our Oxyroom system can be easily set up to inject oxygen into your central HVAC ducting system or be installed as a ductless system. The smart control unit is compatible with contemporary building management systems and can be easily connected with them to synchronise climate and air-quality.
The Purvect Air Purification System uses a multi-stage molecular filtration and the highest level of photocatalytic oxidation in order to eliminate volatile organic compounds (VOCs), gases and microscopic pathogens. This industrial grade filter is a major advancement over simple passive filters as it absorbs harmful chemical contaminants, rather than simply trapping dust at a molecular scale.
Yes, this is a powerful purification system, which is specifically designed to work in high-airflow facilities, and thus can be used in cleanrooms, chemical labs, manufacturing facilities, and hospitals. It has high-static pressure fans capable of drawing large quantities of air through thick filtration beds without decreasing the total ventilation effectiveness.
No, the Purvect system is uniquely designed and validated to perform totally ozone-free, with total safety of occupied corporate and industrial areas. The catalytic reactions that take place internally are fully enclosed in the shielded filter housing emitting no content but clean and purified air into the building.
A Pneumatic Tube System is based on the idea of using a carefully controlled air pressure and vacuum blowers to drive specially capped carriers through a net of dedicated overhead pipes. It transfers paperwork, lab samples or small parts with speeds up to 8 meters per second, moving around massive facilities within seconds.
The system has intelligent frequency-controlled blowers which automatically vary the air pressure in order to give a soft-landing phase, which is gentle and soft, at the receiving terminal. Carriers may also be fitted with special foam inserts to allow the transportation of delicate medical specimens or delicate electronics without risk of being impact damaged.
That network can be expanded to an unlimited size with smart multi-way diverters and branch switches to link dozens of standalone stations in multiple buildings or floors. All active pathways are simultaneously monitored by the central controlling computer, eliminating carrier collisions, and allowing control of traffic flow with complete precision.
Each station has an easy to use digital display panel which displays real time tracking measures of all incoming and outgoing dispatches. This system has a unique barcode or RFID tracking on every carrier, which enables the managers to access full chain-of-custody logs, which can be used in the audit process.
Our Automated Guided Vehicles are controlled by high-tech laser guidance, magnetic tape tracks or a natural feature navigation technology that does not involve structural floor modifications. The onboard navigation computer continuously compares environmental scan data with pre-mapped layouts, to determine accurate positioning within millimeters.
The AGVs will be driven by industrial grade lithium-ion battery packs which will be charged during the standard operational break or idle queue periods. This intelligent charging system enables the cars to operate throughout the day in a series of shifts without manual battery changes or long periods of downtime.
You can use our versatile AGV range with roller decks, lifting forks or tailor-made towing hitches to carry payloads between 500 kg and a few tons. The sensors are also inbuilt load sensors built into the vehicle to ensure that the weight is not exceeded prior to movement to avoid stability problems or strain on the motor during transportation.
All vehicles have safety-certified LiDAR scanners that generate customizable protection fields around the machine. When a human object or worker gets into the warning zone, the AGV automatically slows and when the path becomes fully blocked, the AGV comes to a smooth, immediate halt.
It is a specialized system of industry in which high-velocity negative air pressure is used to move heavy textile laundry and automotive manufacturing waste through special stainless-steel chutes. The materials are conveyed to the central processing/collection rooms at high speeds which leaves production areas clean and uncluttered.
Yes, the inside of the transfer pipelines are made of ultra-smooth, heavy-gauge stainless steel with totally smooth welds. This is a careful production method which makes sure that fabrics, heavy overalls and oily waste products slide through the network with ease without snagging, tearing or forming internal blockages.
The system is constructed in such a way that there are automated fire isolation dampers that open and close individual sections of the chute when a temperature spike is detected. The special dry-pipe sprinkler nozzles and built-in smoke sensors are installed in strategic positions to put out any focused fire threat instantly before it can propagate.
Yes, our car transfer system has non-corrosive interior finishes, and liquid drainage traps to safely dispose of oil-soaked rags or wet linens. The exhausted air is also taken through heavy activated-carbon beds by the air filtration system to absorb industrial chemical smells and fumes to the latter.
An Electrical Track Vehicle system is a set of self-propelled, intelligent vehicles which ride on a set of overhead or wall mounted aluminum tracks. This system operates on special light-to-medium-weight electrified rails to carry out all types of light and medium-weight payloads through facility layouts, which otherwise occupy valuable floor space.
Since the individual vehicles do not actually consume active power until they are actively in motion, the system is radically more efficient in terms of energy consumption as compared to the conventional continuous conveyor belts. The vehicles idle in the absence of any active transport commands without consuming any power of the facility.
Each vehicle has its own onboard microprocessors which continually perform self-diagnostics and report their precise position to the master control software. In case of a technical failure in a vehicle, the system will automatically switch over to alternative track loops, so that your plant logistics will never come to a standstill.
